What To Know
- Use a wrench (if available) or your hand to loosen the nut at the bottom of the auger.
- Use a screwdriver to loosen the screw holding the cutting blade in place.
- Use a soft cloth or brush to clean the exterior of the juicer.
Maintaining your Nama juicer is crucial to ensure its optimal performance and longevity. Disassembling it for thorough cleaning and troubleshooting is a necessary task that can be daunting at first. This comprehensive guide will walk you through the step-by-step process of disassembling your Nama juicer, making it a breeze.
Safety First
Before you begin, ensure that the juicer is unplugged and the power switch is turned off. Always handle sharp components with care and wear gloves if necessary.
Required Tools
- Screwdriver (Phillips head)
- Wrench (optional)
- Soft cloth
- Brush or sponge
Disassembly Instructions
Step 1: Remove the Feed Chute
- Locate the two screws on the top of the feed chute.
- Use a screwdriver to remove the screws.
- Lift the feed chute off the base.
Step 2: Remove the Pulp Collector
- Grip the pulp collector and pull it straight up.
- It should come off easily.
Step 3: Remove the Auger
- Use a wrench (if available) or your hand to loosen the nut at the bottom of the auger.
- Pull the auger straight up to remove it.
Step 4: Remove the Juicing Screen
- Unscrew the two screws holding the juicing screen in place.
- Carefully lift the juicing screen out.
Step 5: Remove the Cutting Blade
- Use a screwdriver to loosen the screw holding the cutting blade in place.
- Carefully remove the cutting blade.
Step 6: Remove the Motor Cover
- Locate the two screws on the back of the motor cover.
- Use a screwdriver to remove the screws.
- Lift the motor cover off.
Step 7: Remove the Motor
- Disconnect the wires from the motor.
- Use a wrench to loosen the bolts holding the motor in place.
- Carefully lift the motor out.
Reassembly Instructions
Follow the disassembly instructions in reverse order to reassemble your Nama juicer.
Cleaning and Maintenance
- Wash all removable parts in warm, soapy water.
- Use a soft cloth or brush to clean the exterior of the juicer.
- Dry all parts thoroughly before reassembling.
Troubleshooting
If you encounter any issues during disassembly or reassembly, refer to the manufacturer’s instructions or contact customer support for assistance.
Final Thoughts
Disassembling your Nama juicer is a straightforward process when you follow the steps outlined in this guide. Regular disassembly and cleaning will ensure that your juicer operates efficiently and provides you with fresh, healthy juices for years to come.
Frequently Asked Questions
Q: How often should I disassemble my Nama juicer for cleaning?
A: It is recommended to disassemble and clean your Nama juicer after every use.
Q: Can I use harsh chemicals to clean my Nama juicer?
A: No, avoid using harsh chemicals as they can damage the components. Use warm, soapy water instead.
Q: What if I lose a screw during disassembly?
A: If you lose a screw, contact the manufacturer for a replacement. Do not use a screw that is not the correct size or type.
Q: How do I know if the juicing screen needs to be replaced?
A: If the juicing screen becomes damaged or clogged, it should be replaced. Inspect it regularly for any signs of wear or tear.
Q: Can I disassemble the motor for cleaning?
A: No, it is not recommended to disassemble the motor for cleaning. If the motor needs servicing, contact the manufacturer.
