The ultimate guide to resetting your kenmore electric range: solve problems quickly and easily

If your Kenmore electric range is malfunctioning or not responding as expected, a reset may be necessary. Follow this comprehensive guide to learn how to reset your Kenmore electric range and restore its functionality.

Why Reset Your Kenmore Electric Range?

Various factors can necessitate resetting your Kenmore electric range, including:

• Power outages
• Malfunctions or error codes
• Unresponsive controls
• Unusual noises or odors

Safety Precautions

Before attempting any reset procedure, ensure your safety by following these precautions:

• Disconnect the range from its power source by unplugging it or turning off the circuit breaker.
• Allow the range to cool completely to avoid burns.
• Wear heat-resistant gloves for added protection.

Reset Methods

Kenmore electric ranges offer two primary reset methods:

Method 1: Power Cycle Reset

This method involves disconnecting and reconnecting the power supply to the range.

1. Unplug the range or turn off the circuit breaker.
2. Wait for 30 seconds to allow the range to discharge any residual power.
3. Reconnect the power and turn on the range.

Method 2: Control Lock Reset

This method is specific to ranges with control locks.

1. Locate the “Control Lock” button on the range’s control panel.
2. Press and hold the button for 3-5 seconds.
3. The control lock should disengage, and the range should reset.

Troubleshooting Common Reset Issues

If the reset procedures do not resolve the issue, try the following troubleshooting steps:

• Check the power supply: Ensure the range is properly connected to a power source and that the circuit breaker is not tripped.
• Inspect the electrical connections: Look for loose or damaged wires inside the range.
• Check the control board: The control board is responsible for operating the range. If it malfunctions, a reset may not be effective.
• Contact Kenmore support: If the reset procedures and troubleshooting steps fail, reach out to Kenmore customer support for further assistance.

Resetting Specific Kenmore Electric Range Models

Different Kenmore electric range models may have specific reset procedures. Refer to your model’s user manual for detailed instructions. Here are some examples:

• Model 790: Press and hold the “Cancel” button for 5 seconds.
• Model 960: Press the “Cooktop Lock” button twice within 3 seconds.
• Model 110: Press and hold the “Start/Pause” button for 5 seconds.

Additional Tips

• Regular cleaning: Keep your range clean to prevent buildup and potential malfunctions.
• Inspect the door seals: Ensure the door seals are intact to prevent heat loss and energy inefficiency.
• Use recommended cookware: Use pots and pans designed for electric ranges to avoid damage to the cooktop.

Wrap-Up: Regaining Range Functionality

Resetting your Kenmore electric range can effectively resolve various issues and restore its functionality. By following the steps outlined above, you can safely and efficiently perform a reset. If the problem persists, do not hesitate to contact Kenmore support for professional assistance.

What You Need to Learn

Q: How often should I reset my Kenmore electric range?
A: Resetting is typically only necessary when experiencing malfunctions or error codes.

Q: Can I reset my range without unplugging it?
A: While possible, it is recommended to unplug the range for safety and complete discharge.

Q: What if the reset procedures don‘t work?
A: Contact Kenmore support for further troubleshooting and potential repair options.

Q: How do I prevent my range from needing frequent resets?
A: Regular cleaning, proper cookware use, and avoiding overloads can help minimize the need for resets.

Q: Is it safe to use my range after a reset?
A: Yes, as long as the reset procedure was performed correctly and the issue is resolved.