What To Know
- Replacing a Whirlpool microwave turntable motor is a simple task that can be completed in under an hour.
- Use the Phillips head screwdriver to remove the screws that hold the motor in place.
- Replacing a Whirlpool microwave turntable motor is a straightforward task that can be completed in under an hour.
Replacing a Whirlpool microwave turntable motor is a simple task that can be completed in under an hour. This step-by-step guide will provide you with the instructions you need to get the job done right.
Materials You’ll Need
- New Whirlpool microwave turntable motor
- Phillips head screwdriver
- Flathead screwdriver
- Needle-nose pliers
Safety Precautions
- Unplug the microwave from the electrical outlet before beginning any work.
- Allow the microwave to cool completely before handling any of the internal components.
- Wear gloves to protect your hands from sharp edges.
Step-by-Step Instructions
1. Remove the Glass Turntable and Turntable Support
- Lift the glass turntable off the turntable support.
- Remove the screws that hold the turntable support in place.
- Carefully lift the turntable support out of the microwave.
2. Locate the Turntable Motor
- The turntable motor is located beneath the turntable support. It is usually held in place by two or three screws.
3. Disconnect the Wires from the Motor
- Use the needle-nose pliers to gently disconnect the wires from the motor.
- Note the position of the wires so that you can reconnect them correctly later.
4. Remove the Motor Mounting Screws
- Use the Phillips head screwdriver to remove the screws that hold the motor in place.
5. Remove the Old Motor
- Carefully lift the old motor out of the microwave.
6. Install the New Motor
- Place the new motor in the microwave and align it with the mounting holes.
- Tighten the mounting screws.
7. Reconnect the Wires to the Motor
- Reconnect the wires to the motor in the same position as they were before.
- Use the needle-nose pliers to secure the wires.
8. Reinstall the Turntable Support
- Place the turntable support back into the microwave and align it with the mounting holes.
- Tighten the screws that hold the turntable support in place.
9. Replace the Glass Turntable
- Place the glass turntable back on the turntable support.
Troubleshooting
- If the microwave does not turn on after replacing the turntable motor, check the following:
- The electrical outlet is working.
- The microwave is plugged into the outlet.
- The door is closed properly.
- The fuses or circuit breakers are not blown.
Wrapping Up: A Smooth-Spinning Microwave
Replacing a Whirlpool microwave turntable motor is a straightforward task that can be completed in under an hour. By following the instructions in this guide, you can save money and keep your microwave running smoothly.
What You Need to Learn
Q: Why is my microwave turntable not spinning?
A: A faulty turntable motor is a common cause of this issue.
Q: How much does it cost to replace a microwave turntable motor?
A: The cost of a new turntable motor varies depending on the model of your microwave. However, you can expect to pay between $20 and $50.
Q: Can I replace the turntable motor myself?
A: Yes, replacing the turntable motor is a simple task that can be completed by most DIYers.
