What To Know
- Locate the top cover of the juicer, which is usually held in place by a latch or a screw.
- Using a wrench or a screwdriver, unscrew the bolts that hold the augers in place.
- After removing the juicer, take the time to thoroughly clean all the components, including the hopper, pulp collector, augers, strainer basket, and juicer base.
Are you struggling to remove your Hurom juicer from its base? Don’t worry, you’re not alone. Many users encounter difficulties when trying to detach the juicer from its housing. In this comprehensive guide, we will provide you with clear and detailed instructions on how to remove a Hurom juicer effortlessly.
Safety Precautions
Before you begin the removal process, ensure that you have unplugged the juicer from the power outlet for safety reasons. Additionally, make sure that the juicer is completely cooled down if it has been recently used.
Step 1: Disassemble the Hopper and Pulp Collector
Start by removing the hopper, which is the part where you insert the fruits and vegetables. Next, detach the pulp collector, which is located beneath the hopper and collects the pulp.
Step 2: Remove the Top Cover
Locate the top cover of the juicer, which is usually held in place by a latch or a screw. Carefully lift or unscrew the top cover to expose the main housing.
Step 3: Unscrew the Augers
Inside the main housing, you will find two augers: a long one and a short one. Using a wrench or a screwdriver, unscrew the bolts that hold the augers in place. Gently pull out the augers.
Step 4: Remove the Strainer Basket
Next, remove the strainer basket, which is located at the bottom of the main housing. It is usually held in place by a latch or a screw. Carefully detach the strainer basket.
Step 5: Disconnect the Pulp Outlet
Locate the pulp outlet, which is a small opening on the side of the main housing. Disconnect the pulp outlet by pressing down on the release button or pulling on the tab.
Step 6: Lift the Juicer Base
Once all the components have been removed, gently lift the juicer base from the motor housing. Be careful not to damage the electrical cords or connections.
Step 7: Clean the Components
After removing the juicer, take the time to thoroughly clean all the components, including the hopper, pulp collector, augers, strainer basket, and juicer base. This will ensure that your juicer is ready for its next use.
Troubleshooting
If you encounter any difficulties during the removal process, refer to the following troubleshooting tips:
- Cannot remove the top cover: Check if the latch is securely fastened or the screw is fully unscrewed.
- Augers are stuck: Apply some penetrating oil or lubricant to the bolts and gently try to loosen them.
- Strainer basket is difficult to remove: Make sure the latch is fully released or the screw is completely unscrewed.
- Cannot disconnect the pulp outlet: Press down firmly on the release button or pull on the tab with more force.
The Bottom Line
By following these detailed instructions, you will be able to remove your Hurom juicer with ease and confidence. Remember to prioritize safety and handle the components with care. With a clean and properly removed juicer, you can enjoy fresh and nutritious juices for years to come.
Basics You Wanted To Know
Q1: Why am I unable to remove the juicer base from the motor housing?
A1: Make sure that all the components have been removed, including the augers, strainer basket, and pulp outlet. Check if any electrical cords or connections are obstructing the removal process.
Q2: How often should I clean my Hurom juicer?
A2: It is recommended to clean your Hurom juicer after each use to ensure optimal performance and prevent bacteria buildup.
Q3: Can I disassemble the juicer for storage purposes?
A3: Yes, you can disassemble the juicer for easy storage. Simply follow the removal steps in reverse order to reassemble the juicer when ready for use.
