What To Know
- In this comprehensive guide, we’ll explore the most common reasons why your Breville espresso machine might be blinking and provide step-by-step instructions on how to fix it.
- Over time, coffee grounds and other particles can accumulate in the filter basket, restricting water flow and causing the machine to blink.
- The water sensor detects the water level in the tank and sends a signal to the machine.
If your Breville espresso machine is blinking, it’s a sign that something is amiss. But don’t panic just yet! Most blinking issues can be easily resolved with a few simple troubleshooting steps. In this comprehensive guide, we’ll explore the most common reasons why your Breville espresso machine might be blinking and provide step-by-step instructions on how to fix it.
Reasons Why Your Breville Espresso Machine Blinks
1. Low Water Level
The most common reason for blinking is a low water level. When the water tank is empty or running low, the machine will blink to alert you. Simply refill the water tank to the appropriate level and the blinking should stop.
2. Clogged Filter Basket
A clogged filter basket can also cause blinking. Over time, coffee grounds and other particles can accumulate in the filter basket, restricting water flow and causing the machine to blink. Remove the filter basket and clean it thoroughly with hot water and a soft brush.
3. Faulty Water Sensor
In some cases, a faulty water sensor can trigger blinking. The water sensor detects the water level in the tank and sends a signal to the machine. If the sensor is malfunctioning, the machine may think the tank is empty even when it’s full. Contact Breville customer support for assistance with replacing the water sensor.
4. Overheating
If your Breville espresso machine is overheating, it will blink to prevent damage. This can occur if the machine is used too frequently without allowing it to cool down. Allow the machine to rest for 30 minutes to an hour before using it again.
5. Air Lock
An air lock can occur when air gets trapped in the water lines. This can cause the machine to blink and prevent water from flowing properly. To remove an air lock, run the machine without a portafilter attached until water flows out of the group head.
6. Faulty Pump
A faulty pump can also cause blinking. The pump is responsible for circulating water through the machine. If the pump is not working properly, the machine will not be able to brew coffee and will blink. Contact Breville customer support for assistance with replacing the pump.
7. Electrical Issues
In rare cases, electrical issues can cause blinking. If you have checked all of the above reasons and the blinking persists, it’s possible that there is an electrical problem. Unplug the machine and contact Breville customer support for assistance.
Recommendations: Troubleshooting for a Blinking-Free Brew
By following these troubleshooting steps, you can diagnose and resolve the most common reasons why your Breville espresso machine might be blinking. Remember, most blinking issues can be fixed easily with a little patience and care. So, don’t give up on your morning espresso just yet!
Quick Answers to Your FAQs
1. Why is my Breville espresso machine blinking red?
Red blinking typically indicates a low water level or a clogged filter basket.
2. Why is my Breville espresso machine blinking orange?
Orange blinking usually indicates overheating or an air lock.
3. Why is my Breville espresso machine blinking green?
Green blinking can indicate a faulty water sensor or an electrical issue.
