What To Know
- If there are air bubbles in the water, run the Keurig through a cleaning cycle with a descaling solution.
- To remove the air, run the Keurig through a cleaning cycle with a descaling solution.
- Run the Keurig through a cleaning cycle with a descaling solution to remove the air.
If your Keurig coffee maker is flashing “not ready,” it can be frustrating. But don’t worry, this is a common problem with a few easy solutions. In this blog post, we will discuss the various causes of this error and provide step-by-step instructions on how to fix it.
Causes of Keurig Coffee Maker Flashing Not Ready
There are several reasons why your Keurig coffee maker may be flashing “not ready.” These include:
- Empty water reservoir: The most common cause of this error is an empty water reservoir.
- Air in the water lines: Air in the water lines can prevent the Keurig from brewing coffee.
- Clogged needles: The needles that puncture the coffee pods can become clogged with coffee grounds or other debris.
- Dirty K-Cup holder: A dirty K-Cup holder can prevent the Keurig from recognizing the K-Cup.
- Faulty water pump: A faulty water pump can prevent the Keurig from pumping water into the brewing chamber.
- Electrical problems: Electrical problems can also cause the Keurig to flash “not ready.”
Troubleshooting Steps for Keurig Coffee Maker Flashing Not Ready
Here are the troubleshooting steps you can follow to fix the “not ready” error on your Keurig coffee maker:
1. Check the Water Reservoir
- Make sure that the water reservoir is full and that there are no air bubbles in the water.
- If the water reservoir is empty, fill it with fresh, cold water.
- If there are air bubbles in the water, run the Keurig through a cleaning cycle with a descaling solution.
2. Check for Air in the Water Lines
- If you have recently changed the water filter, there may be air in the water lines.
- To remove the air, run the Keurig through a cleaning cycle with a descaling solution.
3. Clean the Needles
- The needles that puncture the coffee pods can become clogged with coffee grounds or other debris.
- To clean the needles, use a paperclip or a toothpick to gently remove any debris.
4. Clean the K-Cup Holder
- A dirty K-Cup holder can prevent the Keurig from recognizing the K-Cup.
- To clean the K-Cup holder, remove it from the Keurig and wash it with warm, soapy water.
5. Reset the Keurig
- If none of the above steps work, you can try resetting the Keurig.
- To reset the Keurig, unplug it from the power outlet and wait 30 seconds.
- Then, plug the Keurig back in and turn it on.
6. Contact Keurig Customer Support
- If you have tried all of the above steps and the Keurig is still flashing “not ready,” you can contact Keurig customer support for further assistance.
Final Note: Resolving the Keurig Coffee Maker Flashing Not Ready Issue
By following the troubleshooting steps outlined in this blog post, you should be able to fix the “not ready” error on your Keurig coffee maker. If you continue to experience problems, please contact Keurig customer support.
What You Need to Know
Q: Why is my Keurig coffee maker flashing “not ready” even though the water reservoir is full?
A: There may be air in the water lines. Run the Keurig through a cleaning cycle with a descaling solution to remove the air.
Q: How do I clean the needles on my Keurig coffee maker?
A: Use a paperclip or a toothpick to gently remove any debris from the needles.
Q: How do I reset my Keurig coffee maker?
A: Unplug the Keurig from the power outlet and wait 30 seconds. Then, plug the Keurig back in and turn it on.
