What To Know
- Press the lever to release the chute and lift it up to remove it.
- Use a screwdriver to remove the screws and carefully lift off the motor housing.
- Once the motor housing is removed, you’ll need to separate the motor from the base.
Maintaining your Breville juicer is crucial for optimal performance and longevity. Disassembling it for cleaning or repairs is essential, but it can seem daunting. This comprehensive guide will break down the process into simple steps, empowering you to disassemble your Breville juicer with confidence.
Safety Precautions
Before beginning, unplug the juicer and remove any remaining pulp or juice. Wear gloves to protect your hands and avoid sharp edges.
Step 1: Remove the Pulp Container
Locate the pulp container on the side of the juicer. Grip it firmly and pull it straight up to release it.
Step 2: Detach the Juice Jug
Lift the juice jug straight up from its base to detach it. Set it aside.
Step 3: Remove the Feed Chute
Open the feed chute and locate the lever on the side. Press the lever to release the chute and lift it up to remove it.
Step 4: Unclip the Cutting Disc Assembly
Inside the feed chute, you’ll find the cutting disc assembly. Gently lift the assembly and pull it out towards you to unclip it.
Step 5: Remove the Filter Basket
Below the cutting disc assembly, you’ll see the filter basket. Grasp the handle and pull it straight up to remove it.
Step 6: Detach the Motor Housing
Turn the juicer upside down and locate the screws securing the motor housing. Use a screwdriver to remove the screws and carefully lift off the motor housing.
Step 7: Separate the Motor from the Base
Once the motor housing is removed, you’ll need to separate the motor from the base. Grip the motor and pull it straight up to detach it.
Reassembly: Putting It All Back Together
Once you’ve cleaned or repaired the individual components, reassembly is simply the reverse of the disassembly process. Follow these steps:
1. Attach the motor to the base.
2. Place the motor housing over the base and secure it with screws.
3. Insert the filter basket into the base.
4. Clip the cutting disc assembly into place.
5. Replace the feed chute.
6. Attach the juice jug.
7. Insert the pulp container.
Troubleshooting Common Issues
- Juicer is vibrating excessively: Check if any components are loose or misaligned. Tighten or adjust as needed.
- Pulp is not being ejected properly: Ensure the filter basket is clean and not clogged. The cutting disc may also need sharpening.
- Juicer is not turning on: Check if the power cord is plugged in. The motor may have overheated and needs to cool down.
What You Need to Know
Q: How often should I disassemble and clean my Breville juicer?
A: Disassemble and clean your juicer every 3-6 months for optimal performance.
Q: Can I put the components in the dishwasher?
A: No, only the juice jug and pulp container are dishwasher safe. The other components should be hand-washed.
Q: Where can I find replacement parts for my Breville juicer?
A: You can find replacement parts on the Breville website or through authorized retailers.
