What To Know
- Replacing a wall oven with a range can seem like a daunting task, but with the right tools and a bit of planning, it’s a project that most DIY enthusiasts can tackle.
- Yes, replacing a wall oven with a range is a project that most DIY enthusiasts can tackle with the right tools and a bit of planning.
- The time it takes to replace a wall oven with a range will vary depending on your skill level and the complexity of the installation.
Replacing a wall oven with a range can seem like a daunting task, but with the right tools and a bit of planning, it’s a project that most DIY enthusiasts can tackle. This comprehensive guide will walk you through each step of the process, from disconnecting the old oven to installing the new range.
Materials You’ll Need
- New range
- Screwdriver
- Wrench
- Pliers
- Wire strippers
- Electrical tape
- Caulk gun
- Caulk
- Level
- Measuring tape
Step 1: Safety First
Before you begin, turn off the power to the oven at the circuit breaker or fuse box. This is crucial for your safety and will prevent any electrical accidents.
Step 2: Disconnect the Old Oven
- Open the oven door and locate the electrical junction box on the back or side of the oven.
- Remove the cover plate from the junction box and disconnect the wires from the terminals.
- Unscrew the mounting bolts that hold the oven in place.
- Carefully slide the oven out of the cabinet.
Step 3: Remove the Old Oven Cabinetry
- Cut the electrical supply line to the oven flush with the back of the cabinet.
- Remove the screws that hold the oven cabinet in place and carefully lift it out.
- Patch any holes in the wall or backsplash where the oven was mounted.
Step 4: Install the New Range Cabinetry
- Place the new range cabinet in the space where the old oven was mounted.
- Secure the cabinet with screws.
- Run a new electrical supply line from the circuit breaker to the cabinet.
Step 5: Connect the Range
- Slide the range into the cabinet and secure it with the provided screws.
- Connect the electrical wires from the range to the terminals in the junction box.
- Tighten the wire nuts and cover the junction box with the cover plate.
Step 6: Level and Adjust the Range
- Use a level to ensure that the range is level from front to back and side to side.
- Adjust the leveling legs of the range as needed.
Step 7: Seal and Caulk
- Apply a bead of caulk around the edges of the range where it meets the countertop and backsplash.
- Smooth the caulk with a damp cloth.
Replacing a Wall Oven with a Range: Tips and Tricks
- Measure the space where the oven will be installed before purchasing a new range to ensure a proper fit.
- If you’re not comfortable working with electricity, hire a licensed electrician to handle the wiring.
- Always wear safety glasses when working with power tools or sharp objects.
- Don’t forget to test the new range before using it.
Troubleshooting
- If the range doesn’t turn on, check the circuit breaker or fuse box to ensure that the power is on.
- If the oven doesn’t heat up, check the heating element for any damage or debris.
- If the range makes strange noises, contact the manufacturer for assistance.
Questions You May Have
Q: Can I replace a wall oven with a range by myself?
A: Yes, replacing a wall oven with a range is a project that most DIY enthusiasts can tackle with the right tools and a bit of planning.
Q: What tools do I need to replace a wall oven with a range?
A: You will need a screwdriver, wrench, pliers, wire strippers, electrical tape, caulk gun, caulk, level, and measuring tape.
Q: How long does it take to replace a wall oven with a range?
A: The time it takes to replace a wall oven with a range will vary depending on your skill level and the complexity of the installation. However, you can expect to spend several hours on the project.
