What To Know
- The release button is usually a small, circular button located on the back of the motor unit.
- The collar is a ring-shaped piece that connects the blade assembly to the shaft.
- Once the collar is loose, lift the blade assembly straight up and off the shaft.
KitchenAid hand blenders are renowned for their power and versatility, making them indispensable tools in any kitchen. However, if you’re new to using one, you may find yourself wondering, “How do I open a KitchenAid hand blender?” Follow our step-by-step guide to effortlessly disassemble and assemble your KitchenAid hand blender for cleaning and maintenance.
Removing the Shaft
To remove the shaft from the motor unit, follow these steps:
1. Unplug the blender: Always disconnect the blender from the power source before disassembly.
2. Locate the release button: The release button is usually a small, circular button located on the back of the motor unit.
3. Press the release button: Hold down the release button while pulling the shaft straight up.
4. Gently wiggle the shaft: If the shaft is stuck, gently wiggle it back and forth while pulling upwards.
Removing the Blade Assembly
Once the shaft is removed, you can detach the blade assembly:
1. Unscrew the collar: The collar is a ring-shaped piece that connects the blade assembly to the shaft. Turn it counterclockwise to loosen.
2. Lift off the blade assembly: Once the collar is loose, lift the blade assembly straight up and off the shaft.
Removing the Whisk Attachment (if applicable)
If your hand blender has a whisk attachment, you can remove it as follows:
1. Unclip the whisk attachment: The whisk attachment is usually held in place by a small clip. Locate the clip and push it inward to release the attachment.
2. Pull off the whisk attachment: Gently pull the whisk attachment straight up and off the shaft.
Cleaning the Components
Once the blender is disassembled, you can clean the individual components:
1. Hand wash the shaft and blade assembly: Use warm soapy water and a soft sponge to clean the shaft and blade assembly. Rinse thoroughly and dry with a clean towel.
2. Wipe the motor unit: Use a damp cloth to wipe down the motor unit. Do not immerse the motor unit in water.
3. Clean the whisk attachment (if applicable): Hand wash the whisk attachment in warm soapy water. Rinse thoroughly and dry with a clean towel.
Reassembling the Blender
To reassemble the blender, follow these steps in reverse order:
1. Attach the whisk attachment (if applicable): Align the whisk attachment with the shaft and push it down until it clicks into place.
2. Screw on the collar: Place the collar on the shaft and turn it clockwise to tighten.
3. Insert the shaft into the motor unit: Align the shaft with the motor unit and push it down until it clicks into place.
4. Secure the shaft: Release the release button to secure the shaft in place.
Additional Tips
- Always unplug the blender before disassembly or assembly.
- Handle the blade assembly with care to avoid cutting yourself.
- Clean the blender regularly to maintain its performance and longevity.
- If you encounter any difficulties, refer to the user manual or contact KitchenAid customer support.
Troubleshooting
Q: The shaft won‘t come off.
A: Make sure the release button is fully pressed down and try gently wiggling the shaft. If it still won’t come off, contact KitchenAid customer support.
Q: The blade assembly is stuck.
A: Try using a damp cloth to loosen the collar. If it’s still stuck, contact KitchenAid customer support.
Q: The blender is leaking.
A: Check if the collar is properly tightened. If it is, contact KitchenAid customer support.
Q: The blender is not working.
A: Make sure the blender is properly assembled and plugged in. If it still doesn’t work, contact KitchenAid customer support.
