What To Know
- Use a damp cloth to wipe down the exterior of the juicer base, including the motor housing and any exposed wires.
- Place the juice container back onto the base and align it with the spout.
- No, never run the juicer without the pulp screen as it can damage the auger and other components.
Maintaining a clean Nama juicer is crucial for ensuring optimal performance and preserving the health benefits of fresh juices. This comprehensive guide will walk you through the essential steps of cleaning your Nama juicer, ensuring its longevity and the purity of your juices.
Disassembling the Nama Juicer
1. Unplug the juicer: Always unplug the juicer before cleaning to prevent electrical accidents.
2. Remove the top housing: Lift the top housing straight up to separate it from the base.
3. Extract the auger: Pull the auger straight out of the juicer base.
4. Detach the pulp screen: Unscrew the pulp screen from the bottom of the juicer base.
5. Remove the juice container: Lift the juice container away from the base.
Cleaning the Components
1. Rinse removable parts: Rinse all removable parts (top housing, auger, pulp screen, and juice container) with warm water to remove any leftover juice or pulp.
2. Use a soft brush: Use a soft brush to gently remove any remaining pulp or debris from the auger and pulp screen.
3. Wash with dish soap: Wash all removable parts with mild dish soap and warm water. Use a sponge or soft cloth to avoid scratching the surfaces.
4. Rinse thoroughly: Rinse all parts thoroughly with clean water to remove any soap residue.
Cleaning the Base Unit
1. Wipe down the base: Use a damp cloth to wipe down the exterior of the juicer base, including the motor housing and any exposed wires.
2. Avoid submerging the base: Never submerge the juicer base in water or any other liquid.
3. Clean the cord: Wipe the power cord with a damp cloth to remove any dirt or debris.
Reassembling the Nama Juicer
1. Align the pulp screen: Place the pulp screen back into the juicer base and screw it tightly.
2. Insert the auger: Insert the auger into the juicer base and push it down until it clicks into place.
3. Attach the top housing: Align the top housing with the base and lift it into place until it locks.
4. Secure the juice container: Place the juice container back onto the base and align it with the spout.
Sanitizing the Nama Juicer
1. Fill the juice container with water: Fill the juice container with clean water up to the “max” line.
2. Add vinegar or lemon juice: Add 1/4 cup of white vinegar or lemon juice to the water.
3. Run the juicer: Run the juicer for 30 seconds to circulate the sanitizing solution.
4. Rinse thoroughly: Rinse all parts thoroughly with clean water to remove any vinegar or lemon juice residue.
Drying the Nama Juicer
1. Air dry the parts: Place all removable parts on a clean towel or drying rack to air dry.
2. Wipe down the base: Use a dry cloth to wipe down the juicer base and remove any remaining moisture.
Conclusion: The Power of Cleanliness
Regular cleaning of your Nama juicer is not just a chore; it’s an investment in your health and the longevity of your appliance. By following these steps, you can ensure that your juicer delivers the purest and most nutritious juices for years to come.
FAQ
Q: How often should I clean my Nama juicer?
A: Clean your Nama juicer after each use or every 24 hours if you’re juicing multiple times a day.
Q: Can I use harsh chemicals to clean my Nama juicer?
A: No, avoid using harsh chemicals or abrasive cleaners as they can damage the juicer’s components.
Q: Is it safe to run the juicer without the pulp screen?
A: No, never run the juicer without the pulp screen as it can damage the auger and other components.
Q: How do I prevent mold buildup in my Nama juicer?
A: Clean the juicer thoroughly after each use and allow all parts to air dry completely before storing.
Q: What if my Nama juicer is not juicing efficiently?
A: Check the pulp screen for any blockages or damage. If the screen is clear, the auger may need to be cleaned or replaced.
