Juicing made easy: discover the art of assembling the kuving evo820 for effortless nutrition

Assembling your Kuving’s Juicer Evo820 is a straightforward process that can be completed in just a few minutes. By following these detailed steps, you can ensure that your juicer is assembled correctly and ready to use.

Unboxing Your Juicer

1. Carefully unpack the juicer and remove all components from the box.
2. Check to make sure that all parts are present and undamaged.

Assembling the Base Unit

1. Place the base unit on a stable surface.
2. Insert the pulp container into the base unit, aligning the tabs on the container with the slots in the base.
3. Press down on the pulp container until it clicks into place.
4. Insert the juice container into the base unit, aligning the tabs on the container with the slots in the base.
5. Press down on the juice container until it clicks into place.

Assembling the Auger

1. Insert the auger into the base unit, aligning the tabs on the auger with the slots in the base.
2. Turn the auger clockwise until it is securely tightened.

Assembling the Feed Chute

1. Insert the feed chute into the base unit, aligning the tabs on the chute with the slots in the base.
2. Turn the feed chute clockwise until it is securely tightened.

Assembling the Lid

1. Place the lid on top of the base unit, aligning the tabs on the lid with the slots in the base.
2. Turn the lid clockwise until it is securely tightened.

Assembling the Cleaning Brush

1. Insert the cleaning brush into the cleaning brush holder on the side of the base unit.
2. Turn the cleaning brush clockwise until it is securely tightened.

Assembling the Power Cord

1. Connect the power cord to the base unit.
2. Plug the power cord into an electrical outlet.

Troubleshooting

If you are having trouble assembling your juicer, here are a few troubleshooting tips:

• Make sure that all parts are clean and free of debris.
• Make sure that all parts are properly aligned before assembling.
• If you are having trouble tightening a part, try using a wrench or pliers.
• If you are still having trouble assembling your juicer, please contact Kuving’s customer service department for assistance.

Frequently Asked Questions

Can I use my Kuving’s Juicer Evo820 to make nut milk?
Yes, you can use your Kuving’s Juicer Evo820 to make nut milk. Simply soak your nuts overnight, then drain and rinse them. Add the nuts to the feed chute and juice them on a low speed.

How do I clean my Kuving’s Juicer Evo820?
To clean your Kuving’s Juicer Evo820, simply disassemble the juicer and wash all of the parts in warm, soapy water. You can also use the cleaning brush to clean the auger and the feed chute.

What is the warranty on my Kuving’s Juicer Evo820?
Your Kuving’s Juicer Evo820 comes with a 10-year warranty.