What To Know
- Ensure that the arrow on the auger aligns with the arrow on the base.
- Align the notches on the strainer with the notches on the drum.
- Yes, you can use the Hurom juicer to make nut butters, but it is important to use a fine strainer to prevent the oils from separating.
Are you excited to embark on your juicing journey with your new Hurom juicer? Assembling it correctly is crucial to ensure optimal performance and longevity. In this comprehensive guide, we will walk you through each step of the assembly process, providing clear instructions and helpful tips.
Materials Required
Before you begin, gather the following materials:
- Hurom juicer base
- Auger
- Strainer
- Drum
- Pulp collector
- Juice collector
- Cleaning brush
Step-by-Step Assembly Instructions
1. Attach the Auger to the Base
- Insert the auger into the base of the juicer.
- Ensure that the arrow on the auger aligns with the arrow on the base.
- Push the auger down until it clicks into place.
2. Place the Strainer Inside the Drum
- Insert the strainer into the drum.
- Align the notches on the strainer with the notches on the drum.
- Push the strainer down firmly until it is fully seated.
3. Connect the Drum to the Base
- Align the drum with the base.
- Lift the drum and slide it over the auger.
- Rotate the drum clockwise until it locks into place.
4. Insert the Pulp Collector
- Place the pulp collector inside the drum.
- Ensure that the pulp collector fits snugly against the strainer.
5. Attach the Juice Collector
- Connect the juice collector to the base.
- The juice spout should be facing downward.
6. Secure the Drum Lock
- Close the drum lock by pushing it down.
- The drum should be securely locked in place.
7. Insert the Cleaning Brush
- Insert the cleaning brush into the cleaning port.
- Push the brush down until it reaches the auger.
Tips for Assembly
- Always ensure that all parts are clean and dry before assembly.
- Align the parts carefully to avoid any misalignment.
- Do not overtighten the drum lock.
- If you encounter any difficulties, refer to the user manual or contact Hurom support.
Safety Precautions
- Always unplug the juicer before assembling or disassembling.
- Keep hands away from the auger while it is operating.
- Clean the juicer thoroughly after each use to prevent bacteria growth.
Troubleshooting Common Assembly Issues
- Juicer not starting: Ensure that the drum lock is securely closed and that the juicer is plugged in.
- Excessive vibration: Check if the parts are assembled correctly and that there are no obstructions.
- Leaking juice: Tighten the drum lock and inspect the juice collector for any cracks or damage.
Final Thoughts
Assembling your Hurom juicer is a straightforward process that can be completed in a few minutes. By following these step-by-step instructions and adhering to the safety precautions, you can ensure that your juicer is assembled correctly and ready to provide you with years of healthy and delicious juices.
Frequently Asked Questions
Q: How often should I clean my Hurom juicer?
A: It is recommended to clean the juicer after each use to prevent bacteria growth.
Q: Can I use my Hurom juicer to make nut butters?
A: Yes, you can use the Hurom juicer to make nut butters, but it is important to use a fine strainer to prevent the oils from separating.
Q: What is the best way to store my Hurom juicer?
A: Store the juicer in a cool, dry place away from direct sunlight.
