What To Know
- Place a cup of water in the microwave and heat it for a few seconds to test if it’s working properly.
- If the reset procedure doesn’t resolve the issue, there may be an underlying problem with the microwave.
- No, unplugging the microwave is essential to discharge the power capacitors and ensure a safe reset procedure.
If your Sharp drawer microwave is acting up, a quick reset might be just what it needs. Here’s a comprehensive guide to help you restore your microwave to its optimal performance:
1. Unplug the Microwave
For safety, always unplug the microwave from the power outlet before performing any maintenance or troubleshooting.
2. Wait 60 Seconds
After unplugging the microwave, wait for at least 60 seconds. This allows the power capacitors to discharge completely.
3. Plug the Microwave Back In
Once the waiting period is over, plug the microwave back into the power outlet.
4. Check the Display
If the microwave’s display is blank or shows an error message, press the “Cancel” button to clear it.
5. Reset the Clock
If necessary, reset the clock by pressing the “Clock” button and adjusting the time using the number pad.
6. Test the Microwave
Place a cup of water in the microwave and heat it for a few seconds to test if it’s working properly.
7. Reset the Door Switch
If the microwave is still not functioning correctly, you may need to reset the door switch. To do this:
- Open the microwave door.
- Locate the small button on the door frame that the door switch presses when it’s closed.
- Press and release the button several times.
- Close the microwave door and try using it again.
If the Reset Doesn’t Work
If the reset procedure doesn‘t resolve the issue, there may be an underlying problem with the microwave. In this case, it’s best to contact a qualified appliance repair technician for assistance.
Troubleshooting Tips
- If the microwave display shows an “F” error code, it indicates a faulty fuse. Replace the fuse with a new one of the same amperage rating.
- If the microwave makes a humming noise but doesn’t heat, the magnetron may be faulty. This is a major component that requires professional repair.
- If the microwave sparks or smokes, unplug it immediately and contact a technician. This could be a sign of a serious electrical issue.
Recommendations: Microwave Reset Success!
Resetting your Sharp drawer microwave is a simple yet effective way to resolve common issues and restore its functionality. By following these steps, you can quickly get your microwave back in top shape and enjoy delicious meals in no time.
Frequently Asked Questions
Q: How often should I reset my Sharp drawer microwave?
A: Resetting the microwave is not a regular maintenance task. Only reset it if you experience any issues with its performance.
Q: Can I reset my microwave without unplugging it?
A: No, unplugging the microwave is essential to discharge the power capacitors and ensure a safe reset procedure.
Q: What happens if my microwave continues to malfunction after resetting?
A: If the reset doesn‘t resolve the issue, there may be an underlying problem. Contact a qualified appliance repair technician for assistance.
Q: Can I reset my microwave if it’s sparking or smoking?
A: No, unplug the microwave immediately if you notice sparks or smoke. This could be a sign of a serious electrical issue that requires professional attention.
Q: How do I know if my microwave’s fuse is blown?
A: If the microwave display shows an “F” error code, it indicates a faulty fuse. Replace the fuse with a new one of the same amperage rating.
