What To Know
- If necessary, use a cotton swab dipped in rubbing alcohol to clean the electrical contacts on the base.
- If the juicer is making a loud noise, check if the auger is properly inserted into the juicing bowl.
- Check if the fine mesh filter is clogged, the juicing bowl is properly seated on the base, and the auger is properly inserted into the juicing bowl.
Maintaining a clean NutriBullet Slow Juicer is essential for its optimal performance and longevity. Cleaning it regularly ensures that your juices are fresh, flavorful, and free from bacteria. In this comprehensive guide, we will walk you through every step of the cleaning process, providing detailed instructions and helpful tips to make it effortless.
Disassembling the Juicer
Before cleaning, disassemble the juicer by following these steps:
1. Unplug the juicer from the power source.
2. Remove the hopper lid.
3. Lift the juicing bowl and remove it from the base.
4. Take out the pulp collector and fine mesh filter.
5. Separate the auger from the juicing bowl.
Cleaning the Removable Parts
1. Hopper Lid and Juice Cup: Rinse them thoroughly with warm water. Use a soft brush or sponge to remove any pulp or debris.
2. Juicing Bowl and Pulp Collector: Fill the juicing bowl with warm water and a few drops of dish soap. Swirl the water around to loosen any stuck-on pulp. Use a soft brush to gently scrub the bowl and pulp collector. Rinse them thoroughly with clean water.
3. Fine Mesh Filter: Remove the filter from the juicing bowl. Use a soft brush to gently clean the filter, removing any pulp or debris. Rinse it thoroughly with clean water.
4. Auger: Rinse the auger with warm water. Use a soft brush to remove any stuck-on pulp or debris.
Cleaning the Base
1. Wipe down the base of the juicer with a damp cloth. Avoid getting any water inside the base.
2. If necessary, use a cotton swab dipped in rubbing alcohol to clean the electrical contacts on the base.
Reassembling the Juicer
Once all the parts are clean, reassemble the juicer in reverse order of disassembly:
1. Place the auger back into the juicing bowl.
2. Insert the fine mesh filter into the juicing bowl.
3. Place the pulp collector on top of the filter.
4. Place the juicing bowl onto the base.
5. Secure the hopper lid.
Tips for Effective Cleaning
- Clean the juicer immediately after use to prevent pulp from drying and hardening.
- Use a soft brush or sponge to avoid scratching the parts.
- If you encounter stubborn pulp or debris, soak the parts in warm water for a few minutes before cleaning.
- Rinse all parts thoroughly with clean water to remove any soap residue.
- Allow all parts to dry completely before reassembling the juicer.
Cleaning Frequency
- Clean the juicer after each use.
- If you use the juicer frequently, clean it daily.
- If you use the juicer less frequently, clean it every 2-3 days.
Troubleshooting
- If the juicer is not juicing properly, check if the fine mesh filter is clogged.
- If the juicer is leaking, check if the juicing bowl is properly seated on the base.
- If the juicer is making a loud noise, check if the auger is properly inserted into the juicing bowl.
Answers to Your Questions
Q: Can I put the NutriBullet Slow Juicer in the dishwasher?
A: No, the NutriBullet Slow Juicer is not dishwasher safe.
Q: How often should I replace the fine mesh filter?
A: Replace the fine mesh filter every 3-6 months, or more frequently if it becomes clogged or damaged.
Q: What can I do if my juicer is not juicing properly?
A: Check if the fine mesh filter is clogged, the juicing bowl is properly seated on the base, and the auger is properly inserted into the juicing bowl.
Q: How can I prevent pulp from sticking to the juicer parts?
A: Rinse the juicer parts with warm water immediately after use and use a soft brush to gently remove any pulp or debris.
